was successfully added to your cart.

Description

Feed into the cut and back – motor-powered
Arm height adjustment – motor-powered

Central control panel – stationary
Log handling – manual

Smaller, but truly professional saw band in all respects. Execution of main technical parts, such as the running wheels in their mounts, construction of the saw band arm, engine and feeding systems, etc., are completely identical to those in CTR 800 series or in very powerful CTR 950 Hydraulik and CTR 1000 H/40 series. Continuously adjustable machine feed into the cut and back and saw band arm height adjustment. Travel speed is displayed on the digital display. In this type of machine the central panel is stationary, placed on the beginning of a basic running gear section. This allows convenient control of the machine from a single location.

The feed into the cut and back is driven by an electric motor with worm gearbox controlled by a frequency converter. You can change the speed of travel simply by turning the potentiometer on the control panel. End positions are secured against impact by means of limit switches with automatic deceleration and stopping.

The massive saw band arm is borne on adjustable hard-chromium rods (for moving up and down) which ensure absolute accuracy of saw band arm movement and virtually unlimited service life, if the machine is lubricated regularly. The vertical movement of the arm is provided by double-sided synchronous chain transmission powered by an electric motor with worm gearbox. The movement controlled from the central panel has two modes of speed – rapid feed and slow feed for accurate movement to a desired position. This system can be always additionally equipped with electronic metering which automatically moves to the specified position.

The arm is fitted with running wheels made of high-quality grey cast iron with accurate balancing against vibrations. The wheel has a groove along its circumference. The groove holds a replaceable rubber-textile belt which creates an optimum contact area between the wheel and the saw band.

The sturdily mounted running wheel is powered through a wedge belt by a professional electrical motor specially balanced against vibrations.

The tensioning wheel system moves along a sturdy cast iron wedge guide with adjustable pressure bar, which allows highly accurate adjustment without any free travel even in long-term machine operation.

CTR series present the latest trends in construction of log saw bands with a special emphasis on maximum accuracy and long-term service life of the machine while ensuring minimum costs. The machines are designed in an original modular execution which allows easy replacement or adjustment of all main technical sections and their individual parts. This in the long-term perspective reduces the maintenance costs and service times and therefore production stoppages as well.

        

Technical specification

Max. log diameter 710 mm
Max. opening betwen blade guides 660 mm
Max. elevation of blade 630 mm
Min. log height   30 mm
Max. depth of cut 450 mm
Max. log length (standard model) 2,1 m
Length track section 1 m / 3 m
Min. log length 1 m
Saw blade motor 5,5 (7,5) kW
Horizontal feed motor 0,37 kW
Vertical feed motor 0,55 kW
Sawblade 4140 x 35÷40 x 0,9÷1,1 mm
Weight (standard model) 690 kg
Weight (track section) 25 kg / 97 kg
admin

About admin

CTR 800
Next Post